UPDATED AS OF NOVEMBER 2017
Neck Breaks | $150 & Up | Turnaround: between 5-7 days
Depending on the severity of the break, this may include reinforcing the mended area, grafting woods into voids, and non-spray refinishing. These are case-by-case & hourly. I do my best in each repair of this nature to try and keep the area smooth to the touch and minimize scarring in the damaged area. Although I do my best to keep the appearance of the break at bay, sometime this is just not an option and the area will be hand-finished to the carefullest degree to ensure ease in playability and to minimize recognition of a foreign texture in the playing hand. This type of repair is one of my specialities.
TRUSS ROD RESCUE | $120 | Turnaround: 24 hours
Only applicable on single-action truss rods found in Gibson & vintage Fender guitars. Every once in a while a truss rod may seize up and sometimes break at the point of adjustment. This is more common on vintage single-flex truss rods found in Gibson & Fender vintage-style guitars. In such a case, I have the skills and the tools necessary to replace the broken truss nut and return the instrument to an adjustable state. This will not cure a severe back-bow, but it will help a completely loosened truss rod that has been broken.
BRIDGE REGLUE | $150 & up | Turnaround: 5-7days
Acoustic bridges are removed, surface area cleaned, then either the bridge is either re- applied or replaced with a new one. As with headstock or neck repairs that involve scarred areas, I try to keep any possible residual damage to an absolute minimum. Sometimes chip- out or pull-up damage occurs before the instrument even hits my bench as a result of the initial damage. I will do my best to drop-fill any exposed areas as clean & smooth as possible.
BRIDGE DOCTOR INSTALL | $120 | Turnaround: usually 24 hours.
Helps prevent a bellied acoustic guitar soundboard & improve structural integrity. Price includes the JLD Bridge Truss System. Full setup included. The JLD Bridge Truss System (as found in Breedlove Guitars) improve not only the structural integrity of the soundboard of an acoustic guitar but also enhances the sustain & bass response of any acoustic, even those without a bellied top! It’s nearly invisible once installed and will only increase your instrument’s life.
BRIDGE SHAVE | $100 | Turnaround: 24-48 hours.
For acoustics with thick bridges (such as Guilds), material is removed from the bridge to accommodate a lower saddle height. This is sometimes done to avoid a neck reset. Full setup is included in the price.
CRACKS | $150 & up | Turnaround: variable
Cracks are braced from the inside of the guitar body with cleats, and the crack is glued in some cases. Minor hand-finishing/buffing sometimes applied. These are hourly jobs and price varies greatly depending on the amount & severity of the damage.
COMPLETE REFRETS | Turnaround: usually 3-5 days
Unbound Fretboards: $220 | Bound Fretboards: $240 | Lacquered Maple Boards: $280
Old frets pulled, board planed, slots cleaned, and new frets installed (size & material are your choice). Full setups are included with this service. Stainless steel frets (while available) do require more time & effort and result in a $50 surcharge added to each of the rates above.